Facility Assessment Form |

At any point during this assessment, you have the option to save what you have entered and continue at a later time. You will be provided an option to email the saved form to yourself. It will be valid for 30 days.

1. Contact Information

All fields are required (*)

1.1 Name*

1.4 Email**

1.5 Phone**

1.2 Organization*

1.3 Job Title*

1.6 Facility Name**

Address*

Who have you been in contact with at Lystek about this project?

Save and Continue

2. Facility Overview

2.1 Wet mass of biosolids produced per year:

Unit:

2.2 Solids content of biosolids (%):

2.3 How many hours per day would you be able to operate a Lystek system at your facility?

Please enter a number from 1 to 24.

2.4 How many days per week would you be able to operate a Lystek system at your facility?

Please enter a number from 1 to 7.

2.5 What are your current challenges related to biosolids management?

What processes does your facility currently use? (Check all that apply)

2.6 BNR*

Yes (If yes, additional information will be required)

2.6.1 Are there any issues with the effluent water quality from your plant? If yes, please explain.

2.6.2 Are external carbon sources utilized in your BNR system? (I.e. methanol, glycerol)?

2.6.3 What is the current quantity of the carbon source you use on an annual basis?

Please include units

2.6.4 What is the cost of the carbon source you use on an annual basis?

2.7 Anaerobic Digestion*

Yes (If yes, additional information will be required)

2.7.1 Are your digesters:

Mesophilic

Thermophilic

2.7.2 How many anaerobic digesters do you currently have?

2.7.3 What is the volume of each?

Please include units

2.7.4 What is the flow rate of sludge into and out of the digesters?

Please include units

2.7.5 What is the hydraulic retention time in your digesters?

2.7.6 Is in-flow sludge to digester primary only or is WAS added as well? Please provide ratio.

2.7.7 What is the percent volatile solids destruction in the anaerobic digesters?

2.7.8 What volume of biogas is being produced?

Please include units

2.7.9 Is biogas currently being captured for energy use? If so, how much m3 per day or SCFM?

2.7.10 Methane % of biogas?

2.7.11 If no biogas is being recovered, is there a desire/interest to do so?

2.8 Aerobic Digestion*

Yes (If yes, additional information will be required)

2.8.1 What type of aerobic digesters are you currently using?

2.8.2 How many aerobic digesters do you have?

2.8.3 What is the volume of each?

Please include units

2.9 Dewatering*

Yes (If yes, additional information will be required)

2.9.1 What type of dewatering system do you have?

2.9.2 What is the capacity of your dewatering system?

Please include units

2.9.3 What is the annual cost of polymer at your facility?

2.10 Alkali Stabilization*

Yes (If yes, additional information will be required)

2.10.1 What existing infrastructure do you have?

2.10.2 When was this system installed?

2.11 Managing Additional Organic Wastes*

Yes (If yes, additional information will be required)

2.11.1 What other types of organic waste would you like to manage?

2.11.2 Please describe the nature of this waste?

2.11.3 What kind of volumes would be managed on an annual basis?

Please include units

2.11.4 How are these materials collected and managed presently?

2.12 Are there any further details you would like to provide about your facility’s operating parameters or challenges?

Save and Continue

3. Solids Management Overview

How are you currently managing your biosolids? (Check all that apply)

3.1 Land Application*

Yes (If yes, additional information will be required)

3.1.1 Percentage of total?

3.1.2 What are your current management costs, including transportation?

3.1.3 How far are biosolids currently being transported for land application?

Please include units

3.1.4 Are your biosolids currently managed internally or by a third-party?

3.1.5 Are your biosolids currently managed as Class B or Class A?

3.1.6 Do you have an interest in a Class A or Class A EQ product? If so, why?

3.1.7 Are there any special ordinances, regulations, or permit requirements related to your land application program?

3.2 Land Filling*

Yes (If yes, additional information will be required)

3.2.1 Percentage of total?

3.2.2 What is your current cost of landfilling? (inc. transportation, tipping fees etc.)

3.2.3 Is the material used for disposal or beneficial reuse (Alternative daily cover, etc. ?)

3.2.4 Is your landfill disposal currently managed internally or by a third-party?

3.3 Incineration*

Yes (If yes, additional information will be required)

3.3.1 Percentage of total?

3.3.2 What are your current total management costs? (ex. including transportation, management, ash transportation and disposal, emissions control)

3.3.3 Is this being done internally or by a third-party?

3.3.4 What is the regulatory environment around your incineration program

3.4 Other*

Yes (If yes, additional information will be required)

3.4.1 Percentage of total?

3.4.2 How else are your biosolids currently managed?

3.4.3 What are the current total costs of this management?

3.4.4 Is this being done internally or by a third-party?

3.4.5 Are there any further details you would like to provide about how you are managing your solids or any additional challenges you may be experiencing?

3.5 Are you looking to change your current management? If yes, how?

3.6 How are you currently storing your biosolids?

3.7 What is your current storage capacity?

3.8 What challenges are you or have you experienced related to biosolids management?

Save and Continue

4. Supplemental Data

4.1 Can you provide a simple process flow diagram - with mass balance?*

Yes (If yes, additional information will be required)

4.1.1 File Upload

Please upload an attachment for your flow diagram. Accepted media: jpg,jpeg,xls,xlsx,png,gif,pdf,doc,docx,ppt,pptx,odt,avi,ogg,m4a,mov,mp3,mp4,mpg,wav,wmv,tif Maximum size: 8MB

Drop files here or

Accepted file types: jpg, jpeg, xls, xlsx, png, gif, pdf, doc, docx, ppt, pptx, odt, avi, ogg, m4a, mov, mp3, mp4, mpg, wav, wmv, tif, Max. file size: 2 MB.

4.2 Do you have any other data available regarding your plant treatment performance?*

Yes (If yes, additional information will be required)

4.2.1 File Upload

Please provide any files regarding your plant treatment performance. Accepted media: jpg,jpeg,xls,xlsx,png,gif,pdf,doc,docx,ppt,pptx,odt,avi,ogg,m4a,mov,mp3,mp4,mpg,wav,wmv,tif Maximum size: 8MB

Drop files here or

Accepted file types: jpg, jpeg, xls, xlsx, png, gif, pdf, doc, docx, ppt, pptx, odt, avi, ogg, m4a, mov, mp3, mp4, mpg, wav, wmv, tif, Max. file size: 2 MB.

4.3 Can you provide chemical, metals and pathogens analysis of output solids (sludge/digestate/dewatered biosolids)?*

Yes (If yes, additional information will be required)

4.3.1 File Upload

Please provide any files regarding your plant treatment performance. Accepted media: jpg,jpeg,xls,xlsx,png,gif,pdf,doc,docx,ppt,pptx,odt,avi,ogg,m4a,mov,mp3,mp4,mpg,wav,wmv,tif Maximum size: 8MB

Drop files here or

Accepted file types: jpg, jpeg, xls, xlsx, png, gif, pdf, doc, docx, ppt, pptx, odt, avi, ogg, m4a, mov, mp3, mp4, mpg, wav, wmv, tif, Max. file size: 2 MB.

4.4 Do you have any other comments or important information to share?*

Yes

4.4.1 Please provide any important information below

4.4.2 File Upload

Accepted media: jpg,jpeg,xls,xlsx,png,gif,pdf,doc,docx,ppt,pptx,odt,avi,ogg,m4a,mov,mp3,mp4,mpg,wav,wmv,tif Maximum size: 8MB

Drop files here or

Accepted file types: jpg, jpeg, xls, xlsx, png, gif, pdf, doc, docx, ppt, pptx, odt, avi, ogg, m4a, mov, mp3, mp4, mpg, wav, wmv, tif, Max. file size: 2 MB.

Facility Assessment

1. Contact Information

2. Facility Overview

What processes does your facility currently use? (Check all that apply)

3. Solids Management Overview

4. Supplemental Data

Should you require any further assistance, please email assessment@lystek.com

IMPORTANT LINKS

FOLLOW LYSTEK

CONTACT INFORMATION